2 Stage Pump Adapter - Kit - Munster
2 Stage Pump Adapter Kit - Munster
2 Stage Pump Adapter Kit - Munster
2 Stage Pump Adapter - Kit - Munster
2 Stage Pump Adapter Kit
2 Stage Pump Adapter - Kit - Munster
2 Stage Pump Adapter Kit - Munster
2 Stage Pump Adapter Kit - Munster
2 Stage Pump Adapter - Kit - Munster
2 Stage Pump Adapter Kit

2 Stage Pump Adapter Kit

$1,495.00 Soldes Économisez

La description

2 stage pump adapter kit for seadoo supercharged 4-tec 215hp, 230hp, 255hp, 260hp, 300hp Designed primarily for mini jet boats.

Additional Parts Required

In addition to this kit, you will need to purchase the following parts from your local BRP dealer to make up your additional pump stage. Your existing pump will be your second stage:

Parts Required For All Engine Models:

x1 Aluminum Pump housing - P/N: 271002018

x1 Pump Bearing - P/N: 267000900

x1 Outer Pump Seal - P/N: 293200089

x2 Main Pump Seal - P/N: 271002071

x2 Cone O-ring - P/N: 293300086

x1 O-ring - P/N: 293300090

x1 C-Clip - P/N: 293370038

x1 Pump Suction Tubes - P/N: 271000785

(AND)

Impellers/Wear Rings Recommended For 215hp - 230hp Models:

x1 Front Pump Wear Ring 159mm - P/N: 267000372

x1 Rear Pump Wear Ring 150mm - P/N: 267000897

x1 Front Pump Impeller - Solas 9/14 - P/N: SRZ-FY-09/14

x1 Rear Pump Impeller 12/14 - P/N: 267001046

(OR)

Impellers/Wear Rings Recommended For 255hp - 260hp Models:

x1 Front Pump Wear Ring 159mm - P/N: 267000372

x1 Rear Pump Wear Ring 155mm - P/N: 267001036

x1 Front Pump Impeller - Solas 9/14 - P/N: SRZ-FY-09/14

x1 Rear Pump Impeller 12/19 - P/N: 267000940

(OR)

Impellers/Wear Rings Recommended For 300hp Models:

x1 Front Pump Wear Ring 161mm - P/N: 267000917

x1 Rear Pump Wear Ring 155mm - P/N: 267001036

x1 Front Pump Impeller - Solas 9/14 - P/N: SX-FY-09/14

x1 Rear Pump Impeller 12/19 - P/N: 267000940



OPTIONAL:

Tools required for installation/maintenance:

Female 22 Spline Tool - P/N: 529035892

Male 22 Spline Tool - P/N: 529035820

Male 28 Spline Tool - P/N: 529035956 (Solas Impellers SX-FY-09/14 and SRZ-FY-09/14 include this tool)



NOZZLE:

To achieve maximum performance out of your two stage pump system, it is recommended to purchase an aftermarket nozzle with smaller replaceable nozzle rings. RPM tuning can be achieved through smaller nozzle rings. Changing to a smaller nozzle size will lower RPM and give better performance out of the hole. Nozzle size may also be reduced to improve performance as pump parts get damaged over time. As pump slipping starts to occur and max RPM increases, a smaller nozzle will lower rpm and reduce slipping out of the hole.



Recommended Nozzle Sizes For Impellers Listed Above:

215hp: 80mm Nozzle

230hp: 79mm Nozzle

255hp: 83mm Nozzle

260hp: 83mm Nozzle

300hp: 83mm Nozzle

Parts Included

x1 Pump Housing Adapter - PAS001

x1 Splined Pump Shaft - PAS002

x1 Through Hole Cone - PAS003

x1 Cooling Intake Bypass Plug - PAS004

x1 Cooling Intake Port - PAS005

x1 Second Stage Impeller Shaft Seal - PAS006

x2 Impeller Spacer Ring - PAS007

x1 M27 Shaft Nut - PAS101

x1 O-ring Kit - PAS102

x2 Cone Seal - PAS103

x4 M10-1.5 x 240mm Mounting Studs with Nuts - PAS104

x1 Trim Rod 7.5" Extension, 1/4-28 Thread - PAS105

x1 Steering Rod 7.5" Extension, 5/16-24 Thread - PAS106

x1 Hardware Kit - PAS107

(Does not include reverse bucket extension)

Compatibility

- Fits all Seadoo supercharged 4-Tec models, 215hp - 300hp

(Additional parts required. Please see "Additional Parts" tab)